Add to Cart
Five all-in-one light-up units with three warm white LEDs each, batteries included. These units have the lights already attached with long wires; no circuit building is required! To use, adhere the battery/switch in place. Glue or tape the LEDs in place. Cover with decorative elements, mark “push” over the button so the recipient knows how to turn the lights on.
These are perfect for box cards, pop-ups, and other cards that would otherwise be very difficult to light up. Each unit has three lights, but if you only want one or two, you can cut the extras off. We recommend wrapping a piece of tape around one of the cut ends, so they don’t accidentally touch and create a short circuit.
The battery unit measures approximately 1-3/8″ x 3/4″ and the LEDs are attached with 7″ wires, so you have plenty of length to run your lights wherever you want them on a card or scrapbook page. Any extra length can be curled up and taped down. We don’t recommend creasing sharp folds in the wires, as that may cause them to break and fail.
Don't forget to get the interactive labels or push here.